Introducing
 
- NO TOP release liner
- E-Z STICK is made from one layer of paper.
- SAVES installation time
- E-Z STICK requires one less coat of joint compound compared to the traditional method.
- CREASED for folding in corners
- The crease down the center of the tape makes it easy to fold and install in corners.
- Fiberglass is not creased and is not even recommended for corners.
- FEATHERS easy
- The thinness of the E-Z STICK allows for easy spreading of joint compound.
- Taping tools won’t snag on tape when spreading joint compound.
- STRONGER material
- E-Z STICK is stronger than Fiberglass.
- BILINGUAL labels on each package
- We have provided Spanish or French on one side and English on the other for the convenience of our customers.
- DESCRIPTIVE packaging
- Labels are very descriptive as to how to properly use the E-Z STICK.
- INSTRUCTIONS with each package
- Easy to use, tri-lingual instructions (English, Spanish, French) give the first time user greater confidence in their ability to be successful.
- POINT OF PURCHASE Material
- Point of purchase materials and product samples are available to all dealers to distribute to customers.
- 24/7 TECHNICAL ASSISTANCE
- 24 Hour “Hot Line” assistance is available by dialing 800-721-8273.
|
|
Installation
in Just 3 Easy Steps |
| Step 1 Wet the tape by completely immersing in water.
See video for more details. |
Step 2 Apply first coat
of joint compound and proceed with finishing |
 |
Step 3 Sand, apply finish coat, sand and then decorate. |
 |
|
|
For best results use a "Quick Setting" joint compound.
All-purpose or taping joint compound may be used when the complete instructions are followed.
DO NOT USE any LIGHTWEIGHT or SEMI-LIGHTWEIGHT pre-mixed paste joint compound for the first coat. |
| |
|
|
You can purchase E-Z Taping System products at the following locations: |
 |
 |
 |
|
|
|
|
© E-Z Taping Systems, Inc.
Virtualtech Website Design and Promotion |
|
